Search results

  1. cybertrix

    New SPAM attack style

    I had a PM from smiley as well
  2. cybertrix

    My first try with Damasteel-A Friction Folder

    I have been working on a heat treat oven for quite some time and recently got it finished so for my first project I made a Damasteel friction folder. The whole process was much easier than I anticipated, this one is my first damasteel knife although I do plan to make more. The blade is UK...
  3. cybertrix

    Friction Folder in Dymondwood

    Thanks, I was surprised how nice the Dymondwood turned out.
  4. cybertrix

    Friction Folder in Dymondwood

    I have not posted for a while so here is a friction folder I have just finished for a customer. The blade which is UK law compliant is 2 7/8 inches or 74mm from handle to tip and has a cutting edge of the same dimensions. The overall length is 7 3/8 inches or 188mm. The handles are blue...
  5. cybertrix

    hello folks

    Glad to hear you are doing well, long may it continue!
  6. cybertrix

    Recycled vise/stamping jig

    That's exactly right the 2 welded pieces give a right angle for the stamp to be pushed up against, the angle is square and the back piece is square to the flat bed. Now I know that every time I hit the stamp it will be in the square position. (As long as I hold it properly) My stamp is quite...
  7. cybertrix

    Recycled vise/stamping jig

    I could easily add a clamp but so far it's worked fine, The scrap piece is annealed but I only struck it very lightly to see if it was an even impression. I have also found that when holding the stamp I sometimes get a second stamp mark, usually a small impression close to the first although...
  8. cybertrix

    Shigefusa inspired Custom San Mai 240mm

    A superb piece of pure craftsmanship, well thought out and the materials used to their full potential. First Class!
  9. cybertrix

    Bird and Trout

    A classic knife with classic lines, great work!
  10. cybertrix

    Recycled vise/stamping jig

    I recently had a problem with my old vice when the main screw stripped a couple of threads so it was time to recycle it. I have been wanting to make a stamping jig to help with stamping my makers mark with a little more consistency. I suffer a little from neuropathy in the fingers and I don't...
  11. cybertrix

    Our home burns down

    So sorry to hear about your plight but glad to hear you are in one piece. I hope you get yourselves together soon.
  12. cybertrix

    Safety reminder: flying steel hurts

    Glad you are OK and it could have been much worse. Sometimes it's better to give it a rest, tiredness and pressing jobs can make accidents more likely. Hope your mended soon!
  13. cybertrix

    Is it cheating?

    That looks like a very cost effective method for cutting out blanks. As a hobbyist maker I have limited time and budget so I use a hacksaw for all my blanks. That looks like something I should think about. Thanks for showing.
  14. cybertrix

    What's On Your Bench...

    I am just a hobbyist knifemaker so I don't get into the workshop as much as I would like to. managed to get a couple of hours today and got this little lot heat treated. Start cleaning them up soon.
  15. cybertrix

    Small Rabbiting/Paunching knife

    This is my newest model of Rabbiting knife, a chunky little pocket pauncher. Steel is 4mm thick 80CrV2 The Blade is 2 inches long (50mm) The Overall length is 6 inches (153mm) The handle is Laburnum Burl with one Corby Bolt and lanyard tube in Brass. A good little all round...
  16. cybertrix

    Bailey-Grommit Folder

    Superb Work, A cracking looking knife and UK legal. Very popular model I would have thought. Get ready for the rush!
  17. cybertrix

    (MLL Knives) utilitarian for hard work

    I love it, simple lines but the pin configuration makes it a little different. I like the HT finish left on the blade, Great job! Thanks for showing.
  18. cybertrix

    Shoot Your Dog

    Our latest dog came from a rescue home for unwanted dogs. Curly He is a border collie crossed with something. :5:
  19. cybertrix

    C guard fighter

    Sorry, yes corker is a good thing. I like the spacers and horn you have in the last picture. Look forward to seeing it finished!
  20. cybertrix

    C guard fighter

    I am not a big fan of bowies but I love to see Antler on a knife and this one is a corker. I would love to draw this one in a KITH. I would love to see how it turns out.
Back
Top