1075 and Impala Horn (jigged buffalo)

I like the one silver pin in the middle. The front one must be black. Tell me about the impala horn please. Where did you get it. Was it split and ground flat or whole? Was it easy to work etc.
 
I like the one silver pin in the middle. The front one must be black. Tell me about the impala horn please. Where did you get it. Was it split and ground flat or whole? Was it easy to work etc.
Thanks Chris. I used a micarta pin, and tube for the front and back I like the one silver pin as well
Impala is not easy nor is it to difficult. To keep the pattern requires planning as to not sand any more than necessary. Sanding and polishing is pretty straight forward. I focused on the high ridges for polishing. Pin and tube placement can be problematic with the ridges and valleys.
I think I got these from either Jantz or Culpeppers. I ordered as a scale set. It's actually jigged buffalo horn. I should have read the fine print :)
 
Last edited:
Back
Top