3 copper handled higonokami

[cardoso5fr]

For christmas i'm totaly on copper and higonokami for my futur gift

9,5cm long to the tail, 7,5 cm without
1,8 cm high
Thickness 5 mm and 7 to the pivot
13 cm long 5 ,5 cm sharp
xc75 blade with differential hardening , 180°c tempering
Stainless screw and Bronze Phosphore Washer

I had a very small scrap of sandwich XC100/XC10 and i decided to use it to make two mini higonokami.
4mm thick for the blade, water hardening, flash tempering.
+ or - 8,5 cm long
6 mm thick and 8 to the pivot
4,5 cm sharp and 11 cm long open

I tried a small pocket sheath in leather, but that is far to be perfect, i have a lot of work to make something nice with leather

 

[Bladewarrior]

Beautiful blades, those copper handles look as good as a copper habaki on a katana!