3 knives in ADI and BH6

H

harm

Well-Known Member
it's been a while since i used Arizona Desert Ironwood,which is a really beautiful wood.
first up is the Shikari.
steel is 6mm thick Bohler N690,hardened to 59/60 HRC.
oal is 16.625 in with a 10.75 in blade.
scales are ADI with cutlery bolts and red fibre liners.
the guard is 303 SS with a copper spacer.
finish is hand-rubbed.





 
the AGRO Fighter is 12.8 in oal with a 7.6 in blade.
steel is 6 mm thick Bohler N690 hardened to 59/60 HRC.







 
i made the FnF [Fish and Fowl] for a good buddy who is a trout fisherman,and wanted a nice blade for cleaning trout.
i don't like making hunters and b&t knives so my interpretation of a bird and trout knife might be large compared to the usual.i conceded and used 4mm thick RWL34.
bolsters are 303SS.





 
all the knives are hand finished.
sheaths are leather,which i don't do often as it's very time consuming.



 
the BH6 [Bounty Hunter,6 in blade] was made for use as a camp/survival knife.
steel is 6mm thick Bohler N690,hardened to 59/60 HRC.
scales are blue/black G10 with an exposed butt.
sheath is Kydex
thanks for looking.




 
You must log in or register to reply here.
Back
Top