cardoso5fr
Well-Known Member
I have a bit of time after my work and i'm able to go to the workshop
I did a second copper handle higonokami
8,4 cm long, 10,2 with the tail
Thickness = 5mm and 7 mm to the pivot
14, 4 cm open. highness 1,7 cm, 23 mm to the tail
xc75 blade with differential hardening, 180°c tempering to have something hard.
Stainless pivot and screw and bronze phosphore washer.
The copper is something really soft, that is one more time not a strong user, but as a gent in a nice jacket . I think it's perfect.
I did a second copper handle higonokami
8,4 cm long, 10,2 with the tail
Thickness = 5mm and 7 mm to the pivot
14, 4 cm open. highness 1,7 cm, 23 mm to the tail
xc75 blade with differential hardening, 180°c tempering to have something hard.
Stainless pivot and screw and bronze phosphore washer.
The copper is something really soft, that is one more time not a strong user, but as a gent in a nice jacket . I think it's perfect.