I've got a possible line on a couple of Blademaster grinders. It appears they were popular before the internet, as there's not much on the web about them. They're a two wheel design like the Coote, and reportedly have a good small wheel design. Past that, I know nothing. Any input on these? What's a 15 year old two wheel grinder worth these days?
Blademaster grinders?
- Thread starter jkf96a
- Start date
Ricky Finch
Well-Known Member
I remember a article in one of the knife magazine several years ago. I'll try to go and look at my old copies and see if I can find it..
Jason,
I own one with a 1hp motor, 3 position pulley, the small wheel attachment, flat platen, and 8" wheel. It is still working fine. They ran about $1200+ with attachments. I picked mine up at the KM Guild show in Florida. I built a KMG clone with a 3HP motor that I use more. If I can help with info, pm me.
Fred
I own one with a 1hp motor, 3 position pulley, the small wheel attachment, flat platen, and 8" wheel. It is still working fine. They ran about $1200+ with attachments. I picked mine up at the KM Guild show in Florida. I built a KMG clone with a 3HP motor that I use more. If I can help with info, pm me.
Fred
Mr.Svinarich
Well-Known Member
I have seen several knife makers using them.
It must be reputable?
It must be reputable?