prisonbreak
Well-Known Member
cut slap to an over size of existing old handle and epoxy glue together and pin it, leave overnight...........sand the profile to handle shape then continue sanding the edges to a profile your happy with..........wet and dry sanding from 800 to 1000 grit, leave to dry for a day or two then clear lacquer.
Attachments
-
IMG_20120714_114515.jpg41.3 KB · Views: 40
-
IMG_20120714_110501.jpg31.2 KB · Views: 36
-
IMG_20120710_124722.jpg87.7 KB · Views: 32
-
IMG_20120714_114010.jpg41 KB · Views: 32
-
IMG_20120714_113907.jpg39 KB · Views: 34
-
IMG_20120709_132901.jpg95.6 KB · Views: 35
-
IMG_20120704_094821.jpg94.9 KB · Views: 38
-
IMG_20120628_104152.jpg86.9 KB · Views: 29
-
IMG_20120627_124123.jpg90.9 KB · Views: 30
-
IMG_20120626_213807.jpg83.8 KB · Views: 29