HHH Knives
Super Moderator
Emerald Dragon
The Dragon is a fierce beast. 14 7/8 inches of cutting fury!
Specs.
HHH Damascus Explosion pattern Forged by Randy Jr. Blade measures 247.6mm tip to heel.
Thickness at the spine above heel is 2.6mm tapering to about 1.30mm a inch behind the tip.
Heel height is 51mm The grind is a flat with blended convex. From the edge to the spine.
I measured above the cutting edge and this one is a average of .048mm above the bevels.
Thats gona make this a superior cutter in the kitchen!
Handle is 5 1/4 from front of bolster to butt. and is made up of explosion damascus bolsters with mammoth tooth and stabilized birch burl.
With Mosaic pins full 360* filework and a amazing custom leather sheath.. This baby is one amazing cutter!
Thanks to my new friend Victor. This was a really fun knife to make, from designing it with you, to making and finishing. I enjoyed working with you on this project.
The Dragon is a fierce beast. 14 7/8 inches of cutting fury!
Specs.
HHH Damascus Explosion pattern Forged by Randy Jr. Blade measures 247.6mm tip to heel.
Thickness at the spine above heel is 2.6mm tapering to about 1.30mm a inch behind the tip.
Heel height is 51mm The grind is a flat with blended convex. From the edge to the spine.
I measured above the cutting edge and this one is a average of .048mm above the bevels.
Thats gona make this a superior cutter in the kitchen!
Handle is 5 1/4 from front of bolster to butt. and is made up of explosion damascus bolsters with mammoth tooth and stabilized birch burl.
With Mosaic pins full 360* filework and a amazing custom leather sheath.. This baby is one amazing cutter!
Thanks to my new friend Victor. This was a really fun knife to make, from designing it with you, to making and finishing. I enjoyed working with you on this project.
Enough Talk, Here are the pics.
Randy
