Jarrettknives
Well-Known Member
Go to this thread to order http://www.bladeforums.com/forums/showthread.php?t=737106 as it has updated availability!
First time offer for Do it yourselfers!!! Hobbyists! Survivalists!
Here’s your chance at a high quality, Made in America blade at a fraction of the cost. Do you think that the blade blanks sold through the catalog stores
are made in the U.S.? Guess again. For YOUR knife, do you want quality steel or a steel with a name you can't remember?
Just add the handles of your choice…wood, Micarta, G10, stag, the options are endless.
OR – wrap it in Paracord for the perfect addition to your Bug Out Bag.
Leave it without handles so you can easily lash it to a staff for a quick spear.
* All of these knives are made with O1 Tool steel heat treated in house to 59/60 RC.
* Pre-drilled with 1/8" and 1/4" holes for scales or Paracord wrapping.
* All made from sturdy 1/8" stock, flat ground on BOTH sides.
* Satin finish on the blade grinds; heat colored on the flats.
Models 1, 2, 3, and 5 are only $55. Six of each available now.
Model 4 - The double ground Spear Point is only $75. Only four Spear Points available.
Shipping is only $5.00 for the postman via USPS Priority Mail. Free shipping for three or more blades.
If you buy in pairs, we’ll send you a second blank for only $45 (does not include #4 as the second knife).
So that's 2 quality Jarrett Knives Blanks in O1 Tool Steel for only $100.00.
Here’s how to order...
Post with the number of the knife you would like. Wait for a quick response to make sure it's still available.
Then use the PayPal address at the bottom of this thread. It's that easy!
*Note: All measurements are +/- 1/16"
Drop Point Hunter
Overall Length - 6 1/2" with a 2 7/8" blade
Four available now
Slimline Drop Point Hunter
Overall Length 6 1/2" with a 2 7/8" blade
Six available now
Clip Point Hunter
Overall Length 6 3/4" with a 2 7/8" blade
Six available now
Spear Point (with easy to sharpen top grind - not sharpened)
Overall Length 6 7/8" with a 2 3/4" blade
Four available now
Skinner Blade
Overall Length 6 1/16" with a 2 1/2" blade
Five available now
Here’s your chance at a high quality, Made in America blade at a fraction of the cost. Do you think that the blade blanks sold through the catalog stores
are made in the U.S.? Guess again. For YOUR knife, do you want quality steel or a steel with a name you can't remember?
Just add the handles of your choice…wood, Micarta, G10, stag, the options are endless.
OR – wrap it in Paracord for the perfect addition to your Bug Out Bag.
Leave it without handles so you can easily lash it to a staff for a quick spear.
* All of these knives are made with O1 Tool steel heat treated in house to 59/60 RC.
* Pre-drilled with 1/8" and 1/4" holes for scales or Paracord wrapping.
* All made from sturdy 1/8" stock, flat ground on BOTH sides.
* Satin finish on the blade grinds; heat colored on the flats.
Models 1, 2, 3, and 5 are only $55. Six of each available now.
Model 4 - The double ground Spear Point is only $75. Only four Spear Points available.
Shipping is only $5.00 for the postman via USPS Priority Mail. Free shipping for three or more blades.
If you buy in pairs, we’ll send you a second blank for only $45 (does not include #4 as the second knife).
So that's 2 quality Jarrett Knives Blanks in O1 Tool Steel for only $100.00.
Here’s how to order...
Post with the number of the knife you would like. Wait for a quick response to make sure it's still available.
Then use the PayPal address at the bottom of this thread. It's that easy!
*Note: All measurements are +/- 1/16"
Drop Point Hunter
Overall Length - 6 1/2" with a 2 7/8" blade
Four available now
Slimline Drop Point Hunter
Overall Length 6 1/2" with a 2 7/8" blade
Six available now
Clip Point Hunter
Overall Length 6 3/4" with a 2 7/8" blade
Six available now
Spear Point (with easy to sharpen top grind - not sharpened)
Overall Length 6 7/8" with a 2 3/4" blade
Four available now
Skinner Blade
Overall Length 6 1/16" with a 2 1/2" blade
Five available now
__________________
Best regards and God Bless,
Wayne
Full Time Maker
Member of the Professional Knifemakers Association
www.jarrettknives.com
Are you a Dawg yet?
Be sure to check out the new Jarrett Knives Forum
Stop by my table at
The A.G. Russell Knife Event
Last edited:
