James Puckett
Active Member
I have a B111 and want to build a flipping plate. Does anyone have one they have made that can post a picture. I know They can be bought I just want to make my own and need a little nudge in the right direction.
Flipping plate
- Thread starter James Puckett
- Start date
TacticallySharp
KNIFE MAKER
Made mine out of 3/4" plywood, 2x4s, and some hinges. Been working fine for 2 1/2 years.
Jesse Latham
Well-Known Member
This hinge is part of a factory Bader acc stand. I bought my Bader 3 used and it came with it. Very handy at times.
The tool rest socket is made of 3 ea 3/8” X 3” X 6” pieces and 6 ea 5/8” X 6” pieces of steel. The bolts are spaced so as to form a 1 1/4” X 1 1/4” socket. It takes an 1 1/4 square bar with no issue. No welding just drilling. I can’t remember why one of my 5/8 pieces is short, there doesn’t seem to be any reason. Maybe I miss drilled it. The goldish bolt is to tighten on the tool arm. No reason for it to be grade 8 it's just what I had. Jess
The tool rest socket is made of 3 ea 3/8” X 3” X 6” pieces and 6 ea 5/8” X 6” pieces of steel. The bolts are spaced so as to form a 1 1/4” X 1 1/4” socket. It takes an 1 1/4 square bar with no issue. No welding just drilling. I can’t remember why one of my 5/8 pieces is short, there doesn’t seem to be any reason. Maybe I miss drilled it. The goldish bolt is to tighten on the tool arm. No reason for it to be grade 8 it's just what I had. Jess