Diego_B
New Member
Hello everyone, I have a small Padauk wood hunter forged by me. Heatreated and file tested to ~60HRC. The Padauk is treated like I do most of my woods with grain by applying coats of Tru-Oil and toping it off with Carnauba wax. Knife has no sheath for it but it does come in the wooden knife box also made by me for safe keeping of the knife.
On the lanyard hole I have attached a knife bead made from the same scale and liner material to match the knife. Blade is finished with a 400/600 grit hand rubbed finish with the forge texture left on the flats.
Steel: 1084
OA Length: 8-1/4'
Blade Length: 4"
Blade Finish: 400/600 Grit Satin
Tang: Full
Handle: Padauk
Liners: White G10
Pins: Brass W/Lanyard tube
Blade Thickness: ~⅛ “
Edge Geometry: 20 degrees
Creation Method: Forged
Sheath: N/A
Sells for $125
Shipping in the U.S. and Paypal fees are included.
Feel free to ask if you have any questions
PM me or email me at dbrider13@yahoo.com
Thanks for looking!
Instagram @baca_blades
On the lanyard hole I have attached a knife bead made from the same scale and liner material to match the knife. Blade is finished with a 400/600 grit hand rubbed finish with the forge texture left on the flats.
Steel: 1084
OA Length: 8-1/4'
Blade Length: 4"
Blade Finish: 400/600 Grit Satin
Tang: Full
Handle: Padauk
Liners: White G10
Pins: Brass W/Lanyard tube
Blade Thickness: ~⅛ “
Edge Geometry: 20 degrees
Creation Method: Forged
Sheath: N/A
Sells for $125
Shipping in the U.S. and Paypal fees are included.
Feel free to ask if you have any questions
PM me or email me at dbrider13@yahoo.com
Thanks for looking!
Instagram @baca_blades