Forged Padauk Hunter

Diego_B

New Member
Hello everyone, I have a small Padauk wood hunter forged by me. Heatreated and file tested to ~60HRC. The Padauk is treated like I do most of my woods with grain by applying coats of Tru-Oil and toping it off with Carnauba wax. Knife has no sheath for it but it does come in the wooden knife box also made by me for safe keeping of the knife.
On the lanyard hole I have attached a knife bead made from the same scale and liner material to match the knife. Blade is finished with a 400/600 grit hand rubbed finish with the forge texture left on the flats.

Steel: 1084

OA Length: 8-1/4'

Blade Length: 4"

Blade Finish: 400/600 Grit Satin

Tang: Full

Handle: Padauk

Liners: White G10

Pins: Brass W/Lanyard tube

Blade Thickness: ~⅛ “

Edge Geometry: 20 degrees

Creation Method: Forged

Sheath: N/A

IMG_1429 (1).jpg

IMG_1434 (1).jpg

IMG_0245 (1).jpg

IMG_0249 (1).jpg



Sells for $125
Shipping in the U.S. and Paypal fees are included.
Feel free to ask if you have any questions
PM me or email me at dbrider13@yahoo.com
Thanks for looking!

Instagram @baca_blades
 
Back
Top