Self Made Knives
Well-Known Member
Ok guys, here's part one. A short intro and table disassembly. Skip right to the video or read my boring explanation of why I'm doing this below.
Here's a little background on my interest in CNC. I went to college right out of high school to become a mechanical engineer, but after a couple years of school, I was extremely bored and restless. Got the brilliant idea to quit college and start a roofing business with a friend, which didn't end so well.
Joined the Marine Corps and worked avionics on F18 Hornets. After the military, started college for the second time, in the Electronics Tech program. I became aware of CNC milling in the early 90's while our college class took a tour of a local business that was converting old equipment into modern looking CNC machines bound for factory duty.
I was getting pretty good at computer programming and electronics so I built a couple stepper motor controllers and wrote some code to do basic x and y movements. I even made a cnc Etch-a-Sketch that worked pretty good! Made a crude cnc foam cutting machine for making foam cored R/C airplane parts too.
Then, along came marriage, kids, better job, more school, etc. All those cnc thoughts faded and technology advanced well past what I knew. A few years ago, I bought a Carvewright cnc wood router and it sort of renewed my interest in cnc for a while, but it is pretty limited as to what you can do with it. Everything is proprietary and every little option costs more and more money.
But lately, with this new hobby of knife making, all those cnc thoughts have been creeping back in. Someday, I like to get into some 3d machined pocket knife scales or even some 3d machined fixed blade scales. Pistol grips? I like working on old cars and hot rods, so I've got some ideas for that arena too.
Now, I just hope I can figure all this stuff out again!
[video=youtube_share;Lu8VAfHwjGI]https://youtu.be/Lu8VAfHwjGI[/video]
Here's a little background on my interest in CNC. I went to college right out of high school to become a mechanical engineer, but after a couple years of school, I was extremely bored and restless. Got the brilliant idea to quit college and start a roofing business with a friend, which didn't end so well.
Joined the Marine Corps and worked avionics on F18 Hornets. After the military, started college for the second time, in the Electronics Tech program. I became aware of CNC milling in the early 90's while our college class took a tour of a local business that was converting old equipment into modern looking CNC machines bound for factory duty.
I was getting pretty good at computer programming and electronics so I built a couple stepper motor controllers and wrote some code to do basic x and y movements. I even made a cnc Etch-a-Sketch that worked pretty good! Made a crude cnc foam cutting machine for making foam cored R/C airplane parts too.
Then, along came marriage, kids, better job, more school, etc. All those cnc thoughts faded and technology advanced well past what I knew. A few years ago, I bought a Carvewright cnc wood router and it sort of renewed my interest in cnc for a while, but it is pretty limited as to what you can do with it. Everything is proprietary and every little option costs more and more money.
But lately, with this new hobby of knife making, all those cnc thoughts have been creeping back in. Someday, I like to get into some 3d machined pocket knife scales or even some 3d machined fixed blade scales. Pistol grips? I like working on old cars and hot rods, so I've got some ideas for that arena too.
Now, I just hope I can figure all this stuff out again!
[video=youtube_share;Lu8VAfHwjGI]https://youtu.be/Lu8VAfHwjGI[/video]