Prodigy live blade designed by Marco

cardoso5fr

Well-Known Member
Marco posted a draw on frenchbaliconnexion about a prodigy live blade. He asked me if i could made all the part of the work after the waterjet cut. He did it cut by a firm in belgium for two blade in xc75.
The waterjet cut wasn't really clean, i cleaned everything, grinded the blade, heat treat it (differential oil hardening and full quench for the second and tempering to 200°c.)


I did a third blade with 90MCV8 but i cleaned it too much and decreased the thickness to 3.6. The original blade is 3.96 and the gap is too important. That is not a problem i will keep that blade to make a template. I Will recut the tang and will have a nice template :D


The two blade in xc75 are 3.91 mm the 0.5mm don't seem to be a too big problem for the bushing.


All the blade are with a convex sharpening because i'm not able to make a nice straight second bevel on that sort of grind :D


xc75 differential hardening (waterjet cut)
DSC09001.jpg

DSC09002.jpg

DSC09003.jpg



Mine in 90MCV8 a bit too thin.
DSC09006.jpg

DSC09007.jpg

DSC09008.jpg

DSC09009.jpg

DSC09010.jpg

DSC09011.jpg

DSC09012.jpg



XC75 full quench (waterjet cut)
DSC09013.jpg

DSC09014.jpg

DSC09015.jpg

DSC09016.jpg

DSC09017.jpg

DSC09022.jpg



Familly
DSC09018.jpg

DSC09019.jpg

DSC09020.jpg

DSC09021.jpg
 
Back
Top