gwrollingmills
New Member
Just getting started up, we are building some very high quality rolling mills right out of Friendswood, Texas. Below are pictures of one of our machines as well as a picture of a .5” piece of steel that our machine rolled down to .1830”
The specs are as follows:
42” tall
38.5” wide and long
220 Volt/ 1.5 HP Motor
1,800 RPM
60/1 Gear Ratio
2 1/4” Rollers
Start at 5/8” roll down to as thin as you want
310 lbs
Our machines are priced at $4,200, and you can expect to get your high quality rolling mill in about 4-6 weeks. For inquiries send an email to gwrollingmills@gmail.com.
The specs are as follows:
42” tall
38.5” wide and long
220 Volt/ 1.5 HP Motor
1,800 RPM
60/1 Gear Ratio
2 1/4” Rollers
Start at 5/8” roll down to as thin as you want
310 lbs
Our machines are priced at $4,200, and you can expect to get your high quality rolling mill in about 4-6 weeks. For inquiries send an email to gwrollingmills@gmail.com.