tkroenlein
Well-Known Member
Not so much a WIP or tutorial, but more of a how I done it and I'm all ears if you have a better way. Probably not a go to for me but just some variety. Let me know what you think.
I laid it out it offset rows at 3/8" spacing. Started each line with a round needle file, grooved it a bit with a pretty coarse rat tail, and finished it with a 1/2" parallel half round. Sanded to 220 and WD40.
I laid it out it offset rows at 3/8" spacing. Started each line with a round needle file, grooved it a bit with a pretty coarse rat tail, and finished it with a 1/2" parallel half round. Sanded to 220 and WD40.
Attachments
-
08BFA489-971E-466E-9B1E-A5188446FF00.jpeg285.8 KB · Views: 45
-
7E43A329-8753-4803-9AA4-CCB9969F3C90.jpeg233.7 KB · Views: 42
-
49F16309-31CB-4566-85A9-5037AC4AC019.jpeg196.7 KB · Views: 38
-
0697F5DB-BFFC-4018-B6FF-B03249CD3BF5.jpeg165.3 KB · Views: 39
-
B314285E-1682-4798-B49A-FB19BFC75583.jpeg223.7 KB · Views: 42
-
DCC43671-82F2-4817-8BA2-85056AFEF5DE.jpeg232.6 KB · Views: 44