searching for wrought iron
- Thread starter curtisk
- Start date
mike miller
KNIFE MAKER
Check out Indian George- he had some links for sale at one time
Indian George
Well-Known Member
What size are you looking for??? I have a few billets made up and small links.
Last edited:
Ernie Swanson
SASSY PINK LUUNCHBOX KNIFE MAKER
Troop
Well-Known Member
Aldo Bruno (a.k.a. NJ Steel Baron) had a whole bunch of huge chain links awhile back; I'm sure he still has some. He's got a sub-forum here.
http://knifedogs.com/forumdisplay.php?f=58
http://knifedogs.com/forumdisplay.php?f=58
Last edited:
Wayne Coe
Forum Owner - Moderator
There was a HUGE grain silo torn down in Minnesota a couple of years ago and they got tons of wrought for sale. Contact Rome Hutchings President of ABANA or John Youst of the ABANA Board of Directors for information. Go to www.ABANA.org, then click on ABANA Business, then Board of Directors.
Wayne Coe
Forum Owner - Moderator
I was looking at the New England School of Metalwork web site today and noticed that they have wrought for sale. Check out http://www.newenglandschoolofmetalwork.com/forsale.php for more information.
Wrought Iron Bar
This material was reclaimed by Liberty Salvage two years ago. From a local turn of the century mill building across the river in Lewiston. It forges very well with little or no splitting, has a very lively pattern and welds beautifully. We have 1 1/2"(6 lb./ft)and 1 3/4" round bar (8 pounds/ft). We also will forge down to size for you. The unforged bar is $4.00 per pound, call for forged pricing (207)777-3375. We have sold several thousand pounds to bladesmiths as well as blacksmiths for reproduction work.There is about 15 tons available.
Wrought Iron Bar
This material was reclaimed by Liberty Salvage two years ago. From a local turn of the century mill building across the river in Lewiston. It forges very well with little or no splitting, has a very lively pattern and welds beautifully. We have 1 1/2"(6 lb./ft)and 1 3/4" round bar (8 pounds/ft). We also will forge down to size for you. The unforged bar is $4.00 per pound, call for forged pricing (207)777-3375. We have sold several thousand pounds to bladesmiths as well as blacksmiths for reproduction work.There is about 15 tons available.