Second and third Damascus knives

MikeL

KNIFE MAKER
I would really like to make my own Damascus some day but for now I’m buying what others make. These two are Alabama damascus. The smaller one is 3.2” blade with black/blue carbon weave blue liner handle. About 7” OAL. The second is 4.2” blade. Afzelia bolster and black palm handle. About 8.2” OAL. Sheaths made by my brother. Thanks for looking.

26F35D37-1FA0-411B-AB3A-E4DCE18FD3B7.jpeg16821EA5-CCF3-4D87-AFEA-A80319C100F0.jpeg4B3737FB-8F80-4077-8CA2-4FF83F7A1EB9.jpegBA323423-C099-45C3-B096-23A6B8012E89.jpegFDEA7569-B04B-4AB8-8455-D66920E13D8E.jpeg
 
well...those are just as beautiful and well made as a knife can get.

A+ on the sheath also...perfect match for that knife!
 
Those are some nice knives Mike. have you tried the coffee trick on that Alabama Damascus?

Thank you. I did not etch with coffee. Just a warm blade dunked in warm FC water mix. I hear coffee gives a good contrast but I haven’t tried it yet.
 
Both are beautiful knives. The handle material on both knives are also great. I do like the black palm just a little more, though..:p
Well done on these knives!
 
Thank you all. I failed to notice this thread was brought back alive. Slow to respond. Sorry.
Yes, Opaul , the black palm is stabilized.
Thanks for your comments.
Mike
 
Back
Top