Steven Janik
SUPERMOD & AWARDS BOSS
You have to counterbore the stop pin whch has shoulders and I had to take about .003 off the blade thickness to match up close to perfect. This allowed me to get the blade cleaned up nicely.
I counterbored the pivot from both sides and did a trial assembly. The stop pin location is perfect and the blade centers up almost dead on without any adjustments. I forgot to photo it but you do have to redrill the pivot holes in the frames and blade. I aligned these with a smaller drill bit, clamped them together and drilled and reamed all three together.
I counterbored the pivot from both sides and did a trial assembly. The stop pin location is perfect and the blade centers up almost dead on without any adjustments. I forgot to photo it but you do have to redrill the pivot holes in the frames and blade. I aligned these with a smaller drill bit, clamped them together and drilled and reamed all three together.