HEY ALL,
i HAVE BEEN ASKED TO MAKE A KNIFE FOR A CUSTOMER IN WHICH HE WANTED TI SCALES. I USUALLY USE 1080 PLUS STEEL. WOULD I HAVE A POSSIBLE GALVANIC CORROSION PROBLEM HERE? I HAVE SEEN THREADS ON WHICH METALS DO WHAT TO EACH OTHER BUT THOUGHT I WOULD ASK. I WAS GOING TO USE TI PINS OR MAYBE...
Hey, agreed with all, I did the G10 thing one day and it was not good. the rubber sanding belt is even worse. I used them until I see a kind of marred scratch pattern coming then toss them.
I was just thinking some of you all had a "magic" trick" I will try to blow one and wash it also. The dang...
I use a medium and fine 2x72 Scotchbrite belt a lot since I do mostly scratch finishes. Do you all have any ideas on cleaning them. They seem to get a build up in the webbing. I tried my rubber belt cleaner ( do not try it it will ruin the belt).
Any ideas? washing it? these things are...
Hey all,
Have not posted a knife in a while thought I would post this on that I have almost finished for a customer.
Alabama Random Damascus 0.125 inches
taken to 180 grit then medium scotchbrite belt, then fine scotchbrite belt then etched for about 45 mins in ferric Chloride/white...