Search results

  1. A

    Built my own carbidizer

    What a great thread. Thanks
  2. A

    AEB-L Black Kozuka EDC

    SOLD! AEB-L Black Kozuka EDC First is one of my favorite EDC style blades a "Kozuka". It is small enough to conceal and tough enough for most jobs. SOLD! $115 +7 shipping PayPal, Cash, Postal MO. Steel is .136" AEB-L with 6ORC. Blade is 3.5" long 1" wide. Grind is a right hand chisel with...
  3. A

    Anybody know........??????

    I watched Brians video awhile back and that windex tip is huge benefit in decreasing that ghosting nastiness. Now I am going to pick up a motor brush and some of those TUS stencils as well. So glad I saw this thread :) Oh also you can by "Graphite blocks" on ebay for less then 10 bucks. Big...
  4. A

    Yoroi Toshi D2 Chisel Grind

    sold
  5. A

    Yoroi Toshi D2 Chisel Grind

    (SOLD)Yoroi Toshi D2 Chisel Grind Red Yoroi Toshi Tanto Chisel Grind right hand with apple seed edge D2 tool steel Blade: 7.25" Long OAL: 11 7/8" Thick: .190" Wide: 1.25" Heat Treat 60 Rockwell Blade it hand sanded to 500 grit and finished with green Scotch Brite for a nice easy...
  6. A

    Bowie for Little Rock Show

    That knife is inspirational Karl. When I make a Bowie I will be looking to yours
  7. A

    "Ronin Black" A2 Tanto

    Sold! Thanks Jim
  8. A

    "Ronin Black" A2 Tanto

    “Ronin Black" FOR SALE A2 Tool Steel 3/16” 60rc Cryogenic treatment 5.25” Blade long 4.5” Handle 1.25” Wide Chisel flat ground with convex ground tip. Glass bead blasted satin finish Hard bound cotton cord under-wrap Flat black ito cord overwrap Hard black cord Turkshead Knot Guard. Epoxy...
  9. A

    Wiring 3 position switch to run motor forward/reverse without rewiring

    Thanks Count Yes the motor is reversible. Thanks for the links!
  10. A

    Wiring 3 position switch to run motor forward/reverse without rewiring

    So for this motor http://www.globalindustrial.com/p/motors/ac-motors-2-phase/capacitor-start-motors/elektrimax-56c-footed-115-230v-1ph-15hp-1800rpm-motor would this switch work? http://www.grainger.com/Grainger/IDEAL-Toggle-Switch-1XWT1?Pid=search
  11. A

    salt pot in kiln ?

    I saw a salt kiln in action. Scared me..... :)
  12. A

    November-2012 Bubble Jig with a mystery damascus billet to grind on giveaway.

    Lovin it #263
  13. A

    Wiring 3 position switch to run motor forward/reverse without rewiring

    I was considering installing a drumswitch but after reading this thread I just changed my mind and saved some $$$
  14. A

    "The Alaskan" - WIP

    Great, Thanks for posting that. I am going to give it a go
  15. A

    Green-with a bit of copper.

    Very nice Fred. The colors really pop
  16. A

    VSM. Found a new belt with great price to performance ratio

    I too received some VSM 36 and 50 grit belts to try from TruGrit. I previously was using Blaze and Norton Ceramic ALUMINA. The VSM really preformed well, cut and held up much better then expected and my Blaze are still hanging up on the rack because I am currently preferring the VSM. I will be...
  17. A

    Triple Quench for O-1......?????

    Ed, I would love to see you put one of the knives you test on video. It would really show us in real time what you do.
  18. A

    my version of the poorman's surface grinder/sander

    I could but if only a bit needs to be taken down the sanding would work well. The things will mills is just when you think everything is perfect and you want to "Just touch up" something.... Bam! You forgot to tighten or align or lock down something and the swearing begins. You method looks...
  19. A

    my version of the poorman's surface grinder/sander

    Thanks for the idea. I am going to give that a try on my mill
  20. A

    Handy Dandy Two

    That is so nice.
Back
Top