Calvin Robinson
Moderator Christian Forum
This is a small Slipjoint folder I finished today. I made it specifically for the International Custom Cutlery Exposition,September 18,19&20th,in Kansas City.
The feather Damascus blade is .055" thick and 2 1/4" long,the knife is 3 1/4" long closed. The blade pivots on a bronze pin and bronze washers. I machined the bolster/liners/caps from architectural bronze. All pins are bronze and the scales are sambar stag. I made the spring from 14c28n.
The feather Damascus blade is .055" thick and 2 1/4" long,the knife is 3 1/4" long closed. The blade pivots on a bronze pin and bronze washers. I machined the bolster/liners/caps from architectural bronze. All pins are bronze and the scales are sambar stag. I made the spring from 14c28n.