HHH Knives Custom Nikari X3

[HHH Knives]

Hello and good day. Here are some images of 3 custom Nikari's


Specs.


San Mai High Carbon 1095 clad with 1080 and 15n20 damascus. Ebony and Mammoth Ivory handle.
Blade measures 180m on the edge. is 59mm high at the heel tapering to 50mm. 1" behind the tip.
2.6mm thick at the spine above the heel tapering to 1.8mm.
rounded spine and choil. OAL 310 cm.




High Carbon damascus Tribal pattern With cocobolo burl handle.
Blade measures 210mm on the edge. is 59mm high at the heel tapering to 49mm. 1" behind the tip
2.6mm thick above the heel tapering to 1.63mm.
Rounded spine and choil AOL 349mm




High Carbon damascus Predator pattern. With Ebony and musk ox horn handle.
Blade measures 185mm on the edge. Its 59mm high at the heel tapering to 49mm about a inch behind the tip.
2.6mm thick above the heel tapering to 1.50mm
Rounded spine and choil, OAL 316mm


for more info on these. feel free to message or email.


Thanks and God Bless
Randy

Stay sharp my friends!!

 

[Eaglewood]

as usual--awesome

 

[rhinoknives]

Randy,
Excellent looking knives! My Favorite is??? All of them!!

Well If I was forced to decide on one I would go with Number three!

That Musk Ox handle and the Predator Dammy looks great!

Laurence

www.rhinoknives.com

 

[HHH Knives]

Thanks!!!