bodam
Well-Known Member
I built a home stabilization set up yesterday, and I'm having some problems.
The chamber holds vacuum, while the pump is on, but it will leak down with the pump off. So basically, I leave the pump running.
I put the scales in the solution and run the pump, hoping for the air bubbles to stop, but they never stop. I have a glass jar inside the chamber, with the scales and the resin inside. So any possible air leak shouldn't effect the solution.
I ran a vacuum on a block last night for 3.5 hours, and still saw bubbles. I finally just pulled it out and baked it for an hour. It hardened, but it still floats.
What am I doing wrong?
The chamber holds vacuum, while the pump is on, but it will leak down with the pump off. So basically, I leave the pump running.
I put the scales in the solution and run the pump, hoping for the air bubbles to stop, but they never stop. I have a glass jar inside the chamber, with the scales and the resin inside. So any possible air leak shouldn't effect the solution.
I ran a vacuum on a block last night for 3.5 hours, and still saw bubbles. I finally just pulled it out and baked it for an hour. It hardened, but it still floats.
What am I doing wrong?