Calvin Robinson
Moderator Christian Forum
I'll have this at the blade show but its a prototype it won't be for sale unless someone makes me an offer I can't refuse. I made some .010" washers to use as spacers instead of milling the relief to prevent scratches on the tang. I'll have to use it for six months or a year to see if this technique holds op under hard use.
The blade is Sandvik 14C28N @ 60 Rc,.075"x2 9/16",400 grit hand finish,it pivots on a 3/16" bronze bushing with two steel spacers .010"x3/16" I D x.280" OD.
The integral bolster/caps/liners are 410 stainless.
The scales are yellow Corian.
The knife is 3 1/4" long closed and weighs 1.8 oz.
As usual,questions,comments and constructive criticsism are welcome.
Y'all enjoy!:biggrin:
The blade is Sandvik 14C28N @ 60 Rc,.075"x2 9/16",400 grit hand finish,it pivots on a 3/16" bronze bushing with two steel spacers .010"x3/16" I D x.280" OD.
The integral bolster/caps/liners are 410 stainless.
The scales are yellow Corian.
The knife is 3 1/4" long closed and weighs 1.8 oz.
As usual,questions,comments and constructive criticsism are welcome.
Y'all enjoy!:biggrin: