What's going on in your shop?

IMG_20160303_005440_hdr_zpsv9xzrdzi.jpg
 
^^ I just saw that folder, Very cool! I love that kind of blade.

I'm giving hamons a try, I'm making a traditional(sort of) Puukko looks like I have something going on in there but it's not nearly as clear as I was hoping from the way I applied the clay.

25488406075_058113f923_b.jpg


25377795712_809e8c2659_b.jpg


25488195225_1eba4734a0_b.jpg
 
Ground a Murray Carter design White Crane Jr. Knife is AEB-L @ 62Rc with a 750 grit belt finish. Waiting for a shipment from USA Knife Maker so I can get to the next stage with my first slip joints.

IMG_20160308_214410_zpsxjsvhhpi.jpg
 
Will do, yes the blade is etched. I had a lot more detail in it to start but when I dipped it the acrylic I used came right off... What you see there is my best salvage job.
 
I tried to use nail polish for the one I did and it was like playing with fire. Fun an dangerous. Lol
 
Raised rope file work on an amber stag E D C.
 

Attachments

  • 23666694141_dd51945b49_n.jpg
    23666694141_dd51945b49_n.jpg
    38.2 KB · Views: 58
af0dd10ba536ac8372d33693e241a945.jpg


Finally starting my USAknifemaker liner lock template. I'm using o1 for the blade and stainless for the non locking side. I printed the entire how to thread out and I'm just following it along. So far so good.

Sent from my XT1565 using Tapatalk
 
https://vimeo.com/158802069

This is what I ended up with last night. I need to cut the lock bar next. I'm not sure what route I'll take, I don't own a mill,but I'm thinking I'll end up using my drill press in some way.

Sent from my XT1565 using Tapatalk
 
I have been playing with some handle texturing, this is just a scrap piece give it a try:

25722590111_50cbff3c41_b.jpg


25722620221_080cf21c58_b.jpg


25722620341_82057e8d66_b.jpg


And some work over the weekend:
25722620441_992a0c2b42_b.jpg
 
this is a new design for me

petty / utility
6-1/2 inch blade
AEB-L @ 61 Rc

handle: Red mother of pearl Kirinite

ec7a4a61c7d0c240002aca4ebd344f08.jpg



Sent from my iPhone using Tapatalk
 
Finally got my new Baldor motor for my grinder installed, she ain't a pretty grinder, but she serves the purpose till I can get a 2"x72". I have lots of variety in the works: trying a pocket cleaver for the first time, working on a couple steak knives for a kitchen set, and a few random hunting/camping knives.

IMG_20160312_173544781.jpgIMG_20160312_162935414_HDR.jpg


-Aaron
 
Back
Top