RickA
Well-Known Member
Hi Tedinatl
Glad you like it, if you are thinking of building one, then take a look at the URL's I listed in my first post of this thread - they have far more detail than this post. The KMG one is a complete - step by step guide to making a KMG grinder, from the sizes of all the steel pieces to the bearings, bolts etc, and a step by step construction of a KMG grinder. I printed out that link, and a bunch of other info I found on the KMG grinder and bound it all into a book and it has been my workshop guide to building this one, even though I have built it by drilling and tapping rather than welding, which has required some changes to some of the parts and the layout / design to suit the drill/tap construction method.
It has been great fun to build, and a lot of work, but It will be worth it in the end!!
Rick
Glad you like it, if you are thinking of building one, then take a look at the URL's I listed in my first post of this thread - they have far more detail than this post. The KMG one is a complete - step by step guide to making a KMG grinder, from the sizes of all the steel pieces to the bearings, bolts etc, and a step by step construction of a KMG grinder. I printed out that link, and a bunch of other info I found on the KMG grinder and bound it all into a book and it has been my workshop guide to building this one, even though I have built it by drilling and tapping rather than welding, which has required some changes to some of the parts and the layout / design to suit the drill/tap construction method.
It has been great fun to build, and a lot of work, but It will be worth it in the end!!
Rick