Russian Hunting Knife

Rudi

Well-Known Member
Hello Everybody!
This is a work we were doing together, me and Mark throughout all the process. We were forging together the blade and then I did the grind work and Mark finished it with Hand polish.
When the blade was finished we started to do the Bolster and the pomel, after soldering each of us took one part and we sat each on the grinders.
Then we enter the "Lab Room", its a new room in the workshop and Mark started the work on the wood carving and I on the Engraving.
Mark painted this ornament and edited it on the computer, printed it and we started to work.

20131219_215058.jpg

20131219_220238.jpg

20131219_221125.jpg

20131219_231148.jpg

We placed the papers on the handle and the steel parts and started working...

20131220_085047.jpg

20131220_085109.jpg

20131220_133919.jpg

20131220_133940.jpg

20131220_160136.jpg

20131220_160141.jpg
 
IMG-20131224-WA0006.jpg

IMG-20131224-WA0011.jpg

IMG-20131224-WA0011.jpg

After we finished all the carvings, we blued the steel and the knife was done.
Mark did the sheath and than pictured the finished work.

So,

Blade- 190*40*4, 52100 Steel, Differential Quenching 60-61 HRc, Bronze, Guard and Pomel blued steel- Engraving, Handle - Eucalyptus Jarrah wood, Wood carving. Sheath - Leather.

DSCN2479.jpg

DSCN2480.jpg

DSCN2481.jpg

DSCN2550.jpg

DSCN2552.jpg

DSCN2553.jpg

DSCN2554.jpg

DSCN2555.jpg

so thank you!!
pleasant viewing :D
 
LOVE IT. Very detailed and elegant! Awesome to see how you lay it out. and make it happen.
Im impressed and inspired!
 
Back
Top