Rudi
Well-Known Member
Hello Everybody!
This is a work we were doing together, me and Mark throughout all the process. We were forging together the blade and then I did the grind work and Mark finished it with Hand polish.
When the blade was finished we started to do the Bolster and the pomel, after soldering each of us took one part and we sat each on the grinders.
Then we enter the "Lab Room", its a new room in the workshop and Mark started the work on the wood carving and I on the Engraving.
Mark painted this ornament and edited it on the computer, printed it and we started to work.
![20131219_215058.jpg 20131219_215058.jpg](https://knifedogs.com/data/attachments/29/29621-7ff77cff1a84ef42e10af30219120210.jpg)
![20131219_220238.jpg 20131219_220238.jpg](https://knifedogs.com/data/attachments/29/29622-dd5eddf1bf541197aa7e957f0c082ef8.jpg)
![20131219_221125.jpg 20131219_221125.jpg](https://knifedogs.com/data/attachments/29/29623-f189755380b05176b75d0915f45c2422.jpg)
![20131219_231148.jpg 20131219_231148.jpg](https://knifedogs.com/data/attachments/29/29624-dafdd05590bccdadb0c350642770eac6.jpg)
We placed the papers on the handle and the steel parts and started working...
![20131220_085047.jpg 20131220_085047.jpg](https://knifedogs.com/data/attachments/29/29625-ef1b5a3939ee90a45a79b5ec69a10f6d.jpg)
![20131220_085109.jpg 20131220_085109.jpg](https://knifedogs.com/data/attachments/29/29626-c5de68a476251e0fb20c0a850e09ebbe.jpg)
![20131220_133919.jpg 20131220_133919.jpg](https://knifedogs.com/data/attachments/29/29627-6fcbaf7acebb9f432fdc9faae4c1624d.jpg)
![20131220_133940.jpg 20131220_133940.jpg](https://knifedogs.com/data/attachments/29/29628-eb447bc563eba0ec5e1b03c7225aa577.jpg)
![20131220_160136.jpg 20131220_160136.jpg](https://knifedogs.com/data/attachments/29/29629-3fecc7001329949e560171fd95fa1d9b.jpg)
![20131220_160141.jpg 20131220_160141.jpg](https://knifedogs.com/data/attachments/29/29630-dea6a4bf45084e11d71e82315cbd9b11.jpg)
This is a work we were doing together, me and Mark throughout all the process. We were forging together the blade and then I did the grind work and Mark finished it with Hand polish.
When the blade was finished we started to do the Bolster and the pomel, after soldering each of us took one part and we sat each on the grinders.
Then we enter the "Lab Room", its a new room in the workshop and Mark started the work on the wood carving and I on the Engraving.
Mark painted this ornament and edited it on the computer, printed it and we started to work.
![20131219_215058.jpg 20131219_215058.jpg](https://knifedogs.com/data/attachments/29/29621-7ff77cff1a84ef42e10af30219120210.jpg)
![20131219_220238.jpg 20131219_220238.jpg](https://knifedogs.com/data/attachments/29/29622-dd5eddf1bf541197aa7e957f0c082ef8.jpg)
![20131219_221125.jpg 20131219_221125.jpg](https://knifedogs.com/data/attachments/29/29623-f189755380b05176b75d0915f45c2422.jpg)
![20131219_231148.jpg 20131219_231148.jpg](https://knifedogs.com/data/attachments/29/29624-dafdd05590bccdadb0c350642770eac6.jpg)
We placed the papers on the handle and the steel parts and started working...
![20131220_085047.jpg 20131220_085047.jpg](https://knifedogs.com/data/attachments/29/29625-ef1b5a3939ee90a45a79b5ec69a10f6d.jpg)
![20131220_085109.jpg 20131220_085109.jpg](https://knifedogs.com/data/attachments/29/29626-c5de68a476251e0fb20c0a850e09ebbe.jpg)
![20131220_133919.jpg 20131220_133919.jpg](https://knifedogs.com/data/attachments/29/29627-6fcbaf7acebb9f432fdc9faae4c1624d.jpg)
![20131220_133940.jpg 20131220_133940.jpg](https://knifedogs.com/data/attachments/29/29628-eb447bc563eba0ec5e1b03c7225aa577.jpg)
![20131220_160136.jpg 20131220_160136.jpg](https://knifedogs.com/data/attachments/29/29629-3fecc7001329949e560171fd95fa1d9b.jpg)
![20131220_160141.jpg 20131220_160141.jpg](https://knifedogs.com/data/attachments/29/29630-dea6a4bf45084e11d71e82315cbd9b11.jpg)